From a fence line lost in privet and greenbrier to a back half-acre gone to cedar and hackberry, we clear to the level you need and haul off what is left.
Vacant lots and back fence lines across DFW fill fast with greenbrier, privet, hackberry saplings, and mustang grape vines that pull down fences and feed grass fires in a dry Texas summer. We clear to your goal, not just to bare dirt. Selective clearing keeps the shade trees worth saving while opening the understory; clear-to-grade strips everything for a build pad. Either way the material is chipped and hauled, and we cut fire fuel back from structures and property lines.
Good candidates for clearing
- A fence line swallowed by brush, vines, and volunteer trees
- An overgrown lot you cannot walk or mow
- Scrub cedar and hackberry taking over back acreage
- Site prep for a build, shop, fence, or garden
- A fire-fuel buildup of dead brush close to structures
What’s included
Every lot & brush clearing job we take in Mesquite covers the full scope in writing — no surprise add-ons, no half-finished site left behind:
- Scrub, vine, and briar thickets cut and cleared
- Volunteer saplings and small trees removed
- Fence lines reclaimed and cleared for repair
- Selective keep-the-good-trees or clear-to-grade
- Grapevine and greenbrier pulled off mature trees
- Material chipped on site and hauled off
- Fire-fuel load reduced near structures
Cleared to the level you actually need
Clearing is not all-or-nothing. Some clients want a fence line reopened and the good shade trees kept; others want a lot taken to bare, mowable ground for a build. We talk through what stays and what goes, flag the trees worth keeping, and clear the rest. On sites where you want the ground workable afterward, we can grind stumps so nothing trips a mower or a foundation crew.
- Selective clearing that keeps the trees worth saving
- Fence-line and property-line reclaiming
- Brush, vine, and small-tree removal with haul-off
- Stump grinding for a clean, workable finish
Haul-off, chipping, and a clean finish
We chip what we can and haul off the rest so you are not left with burn piles you have to deal with — useful in a county with burn bans through much of the dry season. If you are clearing to build or fence, pair the job with stump grinding and removal so the ground is ready to work.
Bigger properties often combine clearing with commercial tree service for a single mobilization.
Our lot & brush clearing process, step by step
1. Define the goal
We walk the lot and settle the target: selective clearing that keeps healthy shade trees, or clear-to-grade for a build pad or pasture. That decision sets what stays, what goes, and how low we cut.
2. Flag keepers and lines
Worthwhile trees, the property pins, and any utilities or septic get marked before equipment moves in. On fence-line jobs we locate the fence so the crew reclaims it without tearing it up.
3. Free the good trees
Greenbrier, privet, and mustang grape vines strangling keeper trees are cut at the base and pulled out of the canopy. Left alone they deform growth and add dead fuel.
4. Cut and process brush
Scrub, saplings, and thickets are cut and fed through the chipper as we go, rather than piled to sit. Larger volunteers are dropped, bucked, and hauled with the rest.
5. Reduce fuel and finish
We pull brush and deadwood back from the house, shop, or fence to cut the fire-fuel load, then grade the debris scatter and leave the lot clean and walkable.
What affects the price
We never quote a real tree job sight-unseen or bury you in fake “starting at” prices. Your written estimate is free and itemized. The main factors:
- Total area and how dense the growth is
- Size of the material — brush versus small trees
- How selective the clearing is versus clear-to-grade
- Terrain, slope, and equipment access
- Whether stumps are ground and the site finished
- Haul-off volume and disposal
Why choose J Valdez for lot & brush clearing
We are a family-run company with 25+ years of family tree-care heritage, rooted right here in Mesquite. Homeowners and businesses trust us with this work because we do it safely, price it honestly, and stand behind it:
- 25+ years of hands-on tree-care experience, built on utility line-clearance safety
- Fully licensed and insured — general liability and workers’ compensation, certificates on request
- Rated 4.9★ across 137+ verified customer reviews
- Work performed to ANSI A300 standards and ANSI Z133 safety practices
- Free, itemized written estimates and complete cleanup and haul-off
Lot & Brush Clearing across Mesquite & North Texas
We provide lot & brush clearing from our Mesquite hub across East Dallas County and the wider DFW metroplex, including Lewisville, Flower Mound, Highland Village, Carrollton, Coppell, The Colony, and the county hub for Denton County. See every community on our service areas page.
Related tree services
Lot & Brush Clearing often pairs with other work. Explore Stump Grinding & Removal, Tree Removal, Commercial Tree Service, or see tree service in Mesquite and the county hub for Denton County.